Image 1 of 1
Image 1 of 1
Image 1 of 1
Image 1 of 1
THIS HOUSING IS STILL IN DESIGN/TESTING PHASE.
This housing can be built in 1678mm, 1700mm, 1734mm, 1756mm, 1795mm or 1852mm between wheel faces.
This uses a triton true 9.5” diff centre (many good ratios and dirt cheap) with 2x LC full floating axles.
Custom machined 4140 threaded spindles and 80 series hubs and wheel bearings (included).
100% Cad designed, CNC laser cut and CNC press bent, 3.5” seamless axle tubes.
BIS80 10mm face plate
Fully braced internally, externally.
Price listing is for fully welded 350gr mild steel.
ARP 3/8” UNF 4130 press fit flanged studs/nuts.
Speedflow 2” filler/inspection port.
-8 AN male stainless weld on breather
Raw finish, unpainted.
Conventional Triangulated 4link mounts, reverse upper triangulation mounts, panhard mounts, link tabs, sway bar tabs all avail upon request.
Built to order.
Available in flatpack upon request
THIS HOUSING IS STILL IN DESIGN/TESTING PHASE.
This housing can be built in 1678mm, 1700mm, 1734mm, 1756mm, 1795mm or 1852mm between wheel faces.
This uses a triton true 9.5” diff centre (many good ratios and dirt cheap) with 2x LC full floating axles.
Custom machined 4140 threaded spindles and 80 series hubs and wheel bearings (included).
100% Cad designed, CNC laser cut and CNC press bent, 3.5” seamless axle tubes.
BIS80 10mm face plate
Fully braced internally, externally.
Price listing is for fully welded 350gr mild steel.
ARP 3/8” UNF 4130 press fit flanged studs/nuts.
Speedflow 2” filler/inspection port.
-8 AN male stainless weld on breather
Raw finish, unpainted.
Conventional Triangulated 4link mounts, reverse upper triangulation mounts, panhard mounts, link tabs, sway bar tabs all avail upon request.
Built to order.
Available in flatpack upon request